Changing The Monitor Settings Using The Osd Menu - Fujitsu B24W-5 ECO Operating Manual

Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the Forwards / ECO button to switch the ECO operating mode on or off.
The message Action was executed appears.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
temperature
Brightness
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
on the monitor with the ON/OFF switch.
The Action was executed message appears.
Please proceed in the same manner to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press the Forwards / ECO button and the Back /
time and keep them pressed for a few seconds.
The message Action was executed appears.
Please proceed in the same manner to release the locked ON/OFF switch again.

Changing the monitor settings using the OSD menu

With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
16
6500K
reduced
button for a few seconds while you switch
SELECT/MENU
INPUT button at the same
A26361-K1334-Z220-1-7619, edition 1