Fujitsu fi-4220C Operator's Manual page 87

3. Remove the jammed document.
ATTENTION
4. Press down on the center of the ADF to return it to its original position and lock the
ADF button.
Make sure that the ADF is completely closed. When it is not com-
pletely closed, document jams or feeding errors may occur.
ATTENTION
When the scanning is completed or canceled, the documents might
remain inside the ADF even though any error message is not dis-
ATTENTION
played.
Follow the procedure below to remove the documetns remaining in the
ADF.
•
Staples, paper clips, etc. cause document jams. Be sure to fully
check the document and feed path, and remove any small metal
objects such as these.
Also, before you start scanning, be sure to remove any staples,
clips, etc. from the document.
•
Take care not to pull the pick springs when removing jammed doc-
uments.
Press center of
ADF
1. Remove all documents from the ADF paper chute.
2. Open the ADF by pushing down the ADF button.
3. Remove the remaining documents.
4. Push in the center of the ADF to close it until the ADF button is
locked.
fi-4220C Image Scanner Operator's Guide
5.1 Removing Jammed Documents
5
71