Alcatel TEMPORIS 700 User Manual

Temporis_700_en.qxp
2.2

2. SETUP

CONNECTING THE TELEPHONE
Plug the telephone cord into right-hand socket under
�
2.1 the set and into the wall socket. CONNECTING THE HANDSET
2. SETUP
� Plug one end of the spiral cord into the handset at (A),
NOTE: The extra socket
and the other end into the socket on the left side of the
2.1 CONNECTING THE HANDSET
TEMPORIS™ 700 phone (B).
� Plug one end of the spiral cord into the handset at (A),
and the other end into the socket on the left side of the
2.3 WALL MOUNTING
phone (B).
Turn over the wall mounting peg (small grooved plastic
�
2.2 part) on the base using a coin. CONNECTING THE TELEPHONE
Drill two 6 mm holes 70 mm apart.
�
Plug the telephone cord into right-hand socket under
�
Fit two wall plugs and insert wood screws* (3.5 mm in the set and into the wall socket.
�
2.2 CONNECTING THE TELEPHONE
diameter and 30 mm long).
NOTE: The extra socket
Mount the base on the 2 screws by pulling it
� Plug the telephone cord into right-hand socket under
�
the set and into the wall socket. downwards.
NOTE: The extra socket

3. USE

2.3 WALL MOUNTING
Turn over the wall mounting peg (small grooved plastic
�
3.1 CALL / MESSAGE WAITING LED
part) on the base using a coin.
2.3 WALL MOUNTING
Drill two 6 mm holes 70 mm apart.
� This light flashes in time with the ringer when you receive a call. It goes out as soon as you take the
Turn over the wall mounting peg (small grooved plastic line.
� Fit two wall plugs and insert wood screws* (3.5 mm in
�
part) on the base using a coin. diameter and 30 mm long).
If you are connected to an ALCATEL PABX with a voicemail service, the message waiting LED tells you
Drill two 6 mm holes 70 mm apart.
� Mount the base on the 2 screws by pulling it there is a message in your mailbox.
�
downwards. Fit two wall plugs and insert wood screws* (3.5 mm in There are two different ways of dialling:
�
diameter and 30 mm long).
�
Mount the base on the 2 screws by pulling it
� �
3. USE downwards.
* Screws not supplied.
3.1 CALL / MESSAGE WAITING LED
3. USE
This light flashes in time with the ringer when you receive a call. It goes out as soon as you take the
line.
3.1 CALL / MESSAGE WAITING LED
If you are connected to an ALCATEL PABX with a voicemail service, the message waiting LED tells you
there is a message in your mailbox. This light flashes in time with the ringer when you receive a call. It goes out as soon as you take the
line.
There are two different ways of dialling:
If you are connected to an ALCATEL PABX with a voicemail service, the message waiting LED tells you
�
there is a message in your mailbox.
�
There are two different ways of dialling:
Temporis_700_en.qxp * Screws not supplied.
User guide �
�
mporis_700_en.qxp 24/08/2009 14:46 Page 19
* Screws not supplied.
3.2 DIALLING IN ON-HOOK MODE
1 Press the hands-free key
Pick up the handset to talk. The key is backlit in blue.
2
3.3 USING HANDS-FREE MODE
If you are talking to somebody on the handset, and you want to hear and talk to them over the loudspeaker
instead:
1 Press
The people around you can join in the conversation.
4
The key is backlit in blue.
4
2 To adjust the volume, use the
3 Lift the handset to return to private conversation mode.
3.4 DIALLING USING THE PHONEBOOK / MEMORY KEYS
The phonebook can hold up to 170 name and number entries and 10 quick-dial memory entries.
Each entry can hold up to 20 digits and 16 characters.
To program the phonebook and the quick-dial memory keys, see Section 4.9.
Using the phonebook to make a call
1 Press
Alphabetic order search
2 Enter the first letter, or the first two letters, of the name you are looking for. The first name starting with that
letter appears. To scroll down, press
or
Manual search
2 Press
Press
3
or
3 Press
or
3 Pick up the handset and make the call.
NOTE: The call timer starts about 12 seconds after the last digit is dialled.
Using a memory key to make a call
Temporis_700_en.qxp
Thomson Telecom
Press the memory key associated with the person you want to call.
1
Sales and marketing departments:
2 Pick up the handset to initiate the call.
or
Head office: 46, quai Alphonse Le Gallo - 92100 Boulogne Billancourt - France
4
Press
Joint-stock company with capital of €130,037,460 - Reg. 390 546 059 RCS Nanterre 2
NOTE: The call timer starts about 12 seconds after the last digit is dialled.
Temporis_700_en.qxp 24/08/2009 14:41 Page 2
3.5 TAKING A CALL
There are two ways to pick up a call:
1. GETTING TO KNOW YOUR TEMPORIS 700
1 Pick up the handset.
or
Menu
1 Press
Display key
Back / Correct key
NOTE: If the ringer is off, the incoming call will be indicated on the display (Incoming Call) and by the Call LED
(flashing). You can take the call in either of the two ways described above.
Confirm key
Peg for wall
3.6 HANDSET VOLUME CONTROL
mounting
Navigation keys (up, down, left, right)
Ringer / Message Waiting LED
You can turn the handset volume up or down during a call.
1 Press
Programmable keys
Loudspeaker
3.7 MUTE KEY
Memory keys (M1 to M10)
Memory key labels
The Mute key puts your correspondent on hold so that you can talk to someone else without the first person
hearing.
1 During the call, press
A beep is emitted on the line every 10 seconds.
8
Phonebook key Hands-free key
To resume the conversation, press the Mute key again.
2
Call List key Hands-free and ringer volume control
Mute key Headset key
3.8 REDIAL
Flash key
Pause / Redial key The Redial function can store the last 10 numbers in memory.
There are two ways of redialling a recently called number:
1.1 DISPLAY
Off-hook mode
Your TEMPORIS 700 has a four-line display:
1 Press
1 line of icons and function data, and 3 lines of 16 alphanumeric characters each
�
This automatically redials the last number to be called.
New calls / 8
Total calls
On-hook mode
Mute mode active / Telephone Missed Repeat Voicemail Entry number
On hold locked calls indicator indicator in phonebook
1 Press
8 The most recently dialled number is displayed.
2 Use
Temporis_700_en.qxp
3 Press
1.2 WHAT'S IN THE BOX 8 This automatically dials the number displayed.
1 TEMPORIS 700 telephone set
� Deleting a number
� 1 spiral cord
If you want to erase the traces of your outgoing calls, you can delete the numbers from the redial memory.
1 RJ11/RJ11 telephone cord
�
1 Press
1 memory key label sheet
�
7 user guides (English, French, Spanish, German, Dutch, Portuguese and Italian) 8 The most recently dialled number is displayed.
�
1 telephone cord adapter
� 2 Use
3 Press
2
4 Use
or
"Erase All" (to delete all of the numbers).
2 Use or to select the number you want to delete.
Headset socket (B)
14/09/2009 16:03 Page 3
3 Press .
4 Use or to select "Erase" (to delete the selected number).
or
"Erase All" (to delete all of the numbers).
is for connecting a modem. Spiral cord socket
5 Press to confirm.

4. SETTINGS

(A)
Spiral cord socket
Your TEMPORIS 700 has a "Phone Setting" menu. To access the various sub-menus from the home screen,
follow the instructions below.
Headset socket (B)
(A)
You can return to the home screen from anywhere in any menu or sub-menu by pressing
cancel any action that you started but didn't finish.
If you make a mistake, e.g. if you enter an invalid date, you will hear 3 warning beeps.
Headset socket (B)
4.1 DISPLAY CONTRAST
is for connecting a modem.
1 Press , then press
Use the key to increase the contrast or
2
Horizontal position Wall-mounted position
is for connecting a modem.
3 Press to confirm your choice.
4.2 RINGER MELODY AND VOLUME
4.2.1 To set the melody
1 Press .
2 Press .
3 Press until you see "Ringer".
4 Press twice.
by lifting the handset, then dialling,
Horizontal position Wall-mounted position
8 The set melody is played.
by dialling in on-hook mode.
5 To change the melody, press
Temporis_700_en.qxp 24/08/2009
Horizontal position Wall-mounted position 6 To confirm your choice, press
3
4.2.2 To adjust the ringer volume
When a call comes in
6
1 Press or to adjust the volume (level 1, 2, 3 or OFF).
8 The chosen ringer volume setting will apply to subsequent calls as well.
by lifting the handset, then dialling,
by dialling in on-hook mode. At level 0, the display will indicate "Ringer Off".
8
At all other times
by lifting the handset, then dialling, 24/08/2009 14:41 Page 4
Press .
1
by dialling in on-hook mode.
3
2 Press .
Press .
3
3
4 Press .
, then dial your correspondent's number.
5 Press .
6 Press .
7 The default volume level is 3. To change this, press
8 Confirm by pressing
9 To cut the ringer, select 0, and confirm by pressing
and replace the handset.
4.3 DISPLAY LANGUAGE
1 Press .
and keys.
Press .
2
3 Press twice.
Press .
4
5 Press until you reach the desired language
(Français, Deutsch, Nederlands, Português, Italiano, English, Español)
6 Confirm the chosen language with
4.4 DATE AND TIME
.
Press .
1
2 Press .
Press twice.
. 3
4 Date: Using the number keys, enter the day followed by the month (e.g. 12 and 05 for May 12th).
Time: Enter the time (e.g. 16 and 45 for 16:45).
Temporis_700_en.qxp 5 24/08/2009
or to scroll through the phonebook until you find the name you are looking for.
6 Press to confirm.
to initiate the call.
4.5 TYPE OF DIALLING
to dial your correspondent's number.
The default dialling mode is tone dialling (DTMF).
1 Press .
2 Press to confirm.
3 Press to obtain "Call Settings".
24/08/2009 14:41 Page 5
Press twice.
4
8 "Tone" flashes.
To switch to pulse dialling
to talk in hands-free mode. 1 Press once to obtain "Ratio 60/40".
2 Press to confirm.
or
1 Press twice to obtain "Ratio 66/33".
2 Press to confirm.
4.6 FLASH TIME
, and start talking in hands-free mode.
The default flash time is 100 ms.
Press .
1
2 Press .
Press to obtain "Call Settings".
3
4 Press .
(up) or (down).
Press to obtain "Flash Time".
5
6 Press .
Press to select the desired flash time (100, 300, 600 or some other value).
7
8 Press to confirm.
.
4.7 PAUSE TIME
1 Press .
2 Press .
3 Press to obtain "Call Settings".
4 Press .
Temporis_700_en.qxp 24/08/2009
5 Press to obtain "Pause Time".
. 6 Press .
7 Press to scroll through the pause time settings (1.5s, 2s, 3s or 4s).
8
8 Press to confirm the chosen pause time.
.
4.8 KEYPAD LOCK/UNLOCK
Locking the keypad can prevent unwarranted calls being made. By default, a maximum of 4 digits can be dialled
or to scroll through the last 10 numbers dialled.
when the keypad is locked.
24/08/2009 14:41 Page 6
or pick up the handset or press the hands-free key . This maximum number of digits can be modified (see Section 7 "Installer menu").
When the keypad is locked, the function keys on the left of the keypad are inoperative.
Locking
5 1 Press .
2 Press to obtain "Keypad Lock".
.
3 Press to confirm.
4 Enter the PIN code (by default, 0000) and press
or to select the number you want to delete.
. 8 The icon appears on the display.
To change the PIN code, see Section 4.10.
or to select "Erase" (to delete the selected number).
Unlocking
1 Press .
2 Press to obtain "Keypad Lock".
3 Press to confirm.
4 Enter the PIN code (by default, 0000) and press
The icon appears on the display.
8
To change the PIN code, see Section 4.10.
Unlocking
1 Press .
2 Press to obtain "Keypad Lock".
3 Press to confirm.
again. This will
4 Enter the PIN code (by default, 0000) and press
4.9 MEMORY KEYS AND PHONEBOOK
The TEMPORIS 700 has a phonebook capacity of 170 names and numbers and 10 quick-dial memories.
4.9.1 Programming the memory keys
twice.
to decrease the contrast. 1 Press one of the 10 quick-dial memory keys.
2 Press .
3 Wait for the cursor to move on before you enter the next letter.
4 Attendre que le curseur se déplace avant de taper la lettre suivante.
E.g.: To enter an M, press the key once;
To enter an R, press the key three times.
5 Press .
6 Enter the number, using the keypad.
Temporis_700_en.qxp 24/08/2009 14:43 Page 10
7 Press to save.
NOTE: Use the key to erase a letter or digit.
(choice of 10 ringtones).
14:42 Page 7 NOTE: If "Block Mem. Keys" is enabled in the Installer menu, the memory keys cannot be re-programmed or
.
erased.
Modifying a memory key
Press the desired memory key .
1
2 Press .
3 To edit the name, press .
4 Enter the name, using the keypad.
5 Press to confirm.
Erasing a memory key
1 Press the memory key .
2 Press .
3 Press to confirm.
Storing names and numbers in the phonebook
1 Press .
2 Press .
until you reach the desired level: 1, 2 or 3. 3 Enter the name, using the keypad (see Section 4.9.1).
. 4 Press .
. 5 Enter the number.
6 Press .
NOTE: Use the key to change a mistyped letter or digit before you save.
Editing a phonebook entry
1 Press .
2 Enter the first letter, or the first two letters, of the name you are looking for.
3 Press .
4 Press 4 times to reach "Modify".
5 Press .
.
6 To edit the name, press .
7 Enter the new name and press .
8 To edit the number, press .
Temporis_700_en.qxp 24/08/2009 14:43 Page 11
9 Enter the new number and press .
Deleting an entry from the phonebook
10
14:42 Page 8
Repeat steps 1 and 2 .
Use the or key to select "Erase".
3
4 Press to confirm.
7
Deleting all the entries in the phonebook
Repeat steps 1 and 2 .
3 Use the or key to select "Erase All".
4 Press to confirm.
4.10 PIN CODE
To access certain functions on your TEMPORIS 700 you need to use a PIN code.
By default, the PIN code is 0000. You can modify this to any number of your choosing.
1 Press .
2 Press .
3 Press to obtain "PIN Keylock".
4 Press .
5 Enter the default code (0000) or the modified code (4 digits).
6 Press .
7 Enter the new code (4 digits).
8 Press .
9 Confirm the new code.
10 Press .
4.11 SERVICE KEYS
The , and keys on the keypad can be programmed to store various numbers. For example, the
(Voice Mailbox) key can be used to store the number of the voicemail server.
Press .
1
2 Press .
Press 4 times to obtain "Voice Mailbox".
3
4 Press .
Temporis_700_en.qxp 5 Enter the desired number, using the keypad. 24/08/2009 14:43 Page 12
6 Press .
Proceed in the same way for the other 2 keys: Service A, Service B.
1 Press .
14:42 Page 9
2 Press .
3 Press 6 times for "Service A" or
4 Enter the desired number, using the keypad.
5 Press .
To dial a number stored on one of these 3 keys
Pick up the handset (or use hands-free mode).
1
2 Press and hold , or for at least 2 seconds.
The number is dialled.
8
5. USING THE "CALLER ID" SERVICE*
Your network operator provides a number of subscription-only services.
Your TEMPORIS 700 is compatible with the "Caller ID" service in hands-free or off-hook mode.
This service tells you the name or number of the caller before you take the call, and when you are on the line.
to confirm. 5.1 CALL LIST*
The Call list is linked to the network operator's caller ID service.
The list can store up to 70 numbers of people who have tried to call you. When the memory is full, the oldest
call (bottom of the list) is deleted to make room for the most recent.
The display icons indicate various caller ID data:
This service tells you the name or number of the caller before you take the call, and when you are on the line.
5.1 CALL LIST*
to confirm. The Call list is linked to the network operator's caller ID service.
The list can store up to 70 numbers of people who have tried to call you. When the memory is full, the oldest
call (bottom of the list) is deleted to make room for the most recent.
The display icons indicate various caller ID data:
New calls /
Total calls
Mute mode active / Telephone Missed Repeat
On hold locked calls indicator
to confirm.
5.2 VIEWING THE CALL LIST
If you have new unanswered calls, the icon appears.
1 To consult the Call list, press .
Press to view the other calls.
2
Temporis_700_en.qxp 24/08/2009 14:44 Page 13
* Subject to availability and subscription from your network operator. For further details, contact your operator.
12 While looking up a number
1 To call the number, press .
1 To save a number in the phonebook, press followed by
2 Then press to store it in the phonebook or on one of the memory keys
1 To delete a contact, press .
9
2 Press to reach "Erase".
3 Press to confirm.
NOTE: "Erase All" (by pressing again) deletes all the calls from the list.
6. CONNECTING AND USING A HEADSET*
6.1 CONNECTION
1 Remove the plastic stopper on the left of the base of the telephone.
2 Connect the RJ9 headset cable to the socket.
6.2 HEADSET MODE
Once the headset is connected:
To take an incoming call
1 Press .
8 This key becomes backlit in blue.
2 After the call, press again to hang up.
To call out
1 Press and dial the number, or press one of the memory keys.
You can, at any moment, switch the call into:
8
2 Hands-free mode: press .
or
2 Handset mode: pick up the handset and remove the headset to hear your correspondent.
Temporis_700_en.qxp 24/08/2009 14:44 Page 14
* Not supplied with the TEMPORIS 700. Your headset must have an RJ9 connector. Use headsets that comply with the EN 60950-1 standard
and which are designed to be connected to telephones.
7. INSTALLER MENU
This menu provides access to certain specific programming functions, including system reset.
Procedure for opening the Installer menu
!
The handset must be on-hook.
1 Press and simultaneously.
2 While holding these 2 keys down, pick up the handset.
3 Release the and keys.
4 Leave the handset off-hook while using the various sub-menus.
5 Press one of the 4 following keys to access the corresponding menus:
7.1 KEY 0
Four sub-menus are available.
7.1.1 Memory key lock
To avoid memory keys being accidentally erased. By default, this option is disabled.
To lock/unlock
When the display indicates "Block Mem. Keys":
1 Press to confirm.
2 Press to select "Activate" or "Deactivate".
3 Press to confirm.
7.1.2 Time limit on redial memory
If this option is enabled, it limits the length of time for which the last dialled number is stored to 15 minutes (to
protect your privacy).
To limit the redial memory storage time to 15 minutes:
1 Press until the display shows "Retention Time".
2 Press .
8 The display indicates "Illimited".
3 Press until the display shows: "Limited".
Temporis_700_en.qxp 24/08/2009 14:44 Page 15
4 Press to confirm.
Follow the same procedure to remove the time limit.
7.1.3 Detection threshold
This menu is used to detect the voltage of a device connected in parallel to the modem socket.
By default, the voltage value is fixed.
If a problem arises when there is a device in parallel, the value must be switched to "Learning" so that the
14
telephone can detect the parallel device.
1 Press to obtain "Phone detection".
2 Press .
8 The display shows "Fixed Value".
11
3 Press to obtain "Learning".
4 Press to confirm.
If a problem arises with a telephone connected in parallel
7 times for "Service B".
If the display indicates "Busy Line", then the telephone connected in parallel is not on line:
1 Disconnect the TEMPORIS 700 line cord.
2 Pick up the handset.
3 Wait for the display to go blank.
Replace the handset and reconnect the line cord.
4
7.1.4 Maximum number of digits
This menu is used to set the maximum number of digits that can be dialled when the keypad is locked. By
default, the number is set to 4 digits.
1 Press until the display shows "Nb Digit Max?".
7.2 KEY 3 / RESET
!
Caution: reset is immediate – all program settings, memory keys, etc. will be erased, and the PIN
code will return to its initial value (0000).
1 Press .
8 Immediate reset.
7.3 KEY 6 / DISPLAY TEST
!
code will return to its initial value (0000).
1 Press .
8 Immediate reset.
7.3 KEY 6 / DISPLAY TEST
Display test (technicians only).
Temporis_700_en.qxp 24/08/2009 14:46 Page 16
7.4 KEY 9 / SOFTWARE VERSION
Voicemail Entry number Software version (technicians only).
indicator in phonebook
8. ADDITIONAL INFORMATION
8.1 TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The display is blank. The telephone is not Reconnect the telephone.
There is no dial tone. properly connected.
The telephone has not Pick up the handset and wait for the icons to appear on
been initialized. the display (see Section 2 "Setup").
The telephone The ringer has been See Section 4.2 "Ringer melody and volume".
doesn't ring. turned off.
Can't unlock the Wrong PIN code. See Section 7.2 "Key 3 / Reset".
keypad
8.2 DEFAULT SETTINGS
.
Contrast Level 3 Dialling Tone
.
Language French Flash time 100 ms
Ringtone 1 Pause time 2 s
Voicemail Empty
9. PRECAUTIONS FOR USE / TECHNICAL SPECIFICATIONS
Caution: never let your telephone set come into contact with water. You may, however use a damp cloth to
�
clean your telephone.
For cleaning your set, use only a damp cloth; do not use solvents (alcohol, trichloroethylene, acetone...) and
�
sprays which may damage your set.
During storms, you are advised not to use the telephone.
�
The TEMPORIS 700 telephone is designed for making and receiving telephone calls and for connection to a
�
Temporis_700_en.qxp private or public service telephone network. 24/08/2009 14:46 Page 17
Appliance designed for connection to a TNV3-class analogue telephone line as defined in European safety
�
standard EN60950-1.
Headset socket
10. WARRANTY
We would remind you that the TEMPORIS 700 is an appliance approved in compliance with European
regulations, as attested to by the CE marking.
You thus have a legal warranty covering this product and you should contact your reseller for any information
relating to the said warranty.
Regardless of the legal warranty covering the product, the reseller guarantees conformity of the products with
their technical specifications for a period of twelve (12) months including parts and labour, starting from the date
appearing on the proof of purchase of the product. You should therefore retain your invoice or till receipt
16
specifying the date of purchase of the product and the name of the reseller. However, if the legal warranty
applicable in your country exceeds twelve (12) months, the legal warranty alone then applies. However, if the
legal warranty is less than twelve (12) months, the total period of the warranty (legal and commercial) will be of
twelve (12) months. The faulty part or product will be repaired or replaced free of charge with an identical part
or product or an equivalent or better one in terms of functionality and performance. If it proves impossible to
repair or replace the item, you will be refunded for the product.
Products and spare parts - which may be either new or refurbished - are guaranteed either for three months from
the date of repair or until the end of the initial warranty period, whichever is the longer. Products and parts that
have been returned and replaced become the property of the manufacturer.
However, this warranty does not apply in the following cases:
installation or use in a way which fails to comply with the instructions contained in this guide;
�
incorrect connection or non-standard use of the product, notably with accessories not designed for the
�
purpose;
normal wear;
13 �
� failure to observe the technical and safety standards in force in the country of use;
� appliances subjected to shocks or falls;
devices damaged by lightning, voltage surge, heat sources or radiation therefrom, water, exposure to
�
excessive humidity, or any other cause external to the product itself;
negligence or poor maintenance;
�
maintenance or repair of the product by persons not authorized by the manufacturer or reseller.
�
THE PRESENT TERMS AND CONDITIONS EXPRESSLY EXCLUDE ALL OTHER WARRANTIES. YOUR
STATUTORY RIGHTS ARE NOT AFFECTED.
11. SAFETY AND DECLARATION OF CONFORMITY
, , , .
! Do not use your telephone to notify a gas leak when standing in the vicinity of the leak.
We recommend not using a telephone during a storm.
Thomson Telecom hereby declares that the TEMPORIS 700 conforms to the essential requirements and other
Temporis_700_en.qxp applicable provisions of European directive 1999/5/CE. 24/08/2009 14:46 Page 18
12. ENVIRONMENT
This symbol means that your inoperative electronic appliance must be collected separately and not
mixed with the household waste. The European Union has implemented a specific collection and
recycling system for which producers are responsible.
This appliance has been designed and manufactured with high quality materials and components that
can be recycled and reused. Electrical and electronic appliances are liable to contain parts that are necessary
in order for the system to work properly but which can become a health and environmental hazard if they are
not handled or disposed of in the proper way. Consequently, please do not throw out your inoperative appliance
with the household waste.
If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave it with
the vendor when buying a new appliance.
- If you are a professional user, please follow your supplier's instructions.
- If the appliance is rented to you or left in your care, please contact your service provider.
!
Please help us protect the environment in which we live.
18
15
17