Error Indications - Toyota TAS200 Owner's Manual

Error indications

If the CD player does not work, the CD stops suddenly during playback, or a similar
problem occurs, an error indication will appear on the display. The cause of the trouble
will be indicated by an error number, and you should check the corresponding item shown
in the table below.
ErrOr 1
ErrOr 3
ErrOr 4
NO SONGS
WAIT
When the disc is dirty or has been inserted upside-down.
Check the disc.
There is probably an electrical or mechanical fault in the CD player.
Contact your authorized repairer and ask for repair.
This appears when there is excess current flow.
Contact your authorized repairer and ask for repair.
This appears when an MP3/WMA/AAC file format is unusual and not
supported by this unit like WAV format recordings.
Please check the MP3/WMA/AAC file format.
This appears when the CD player does not work because its
temperature is high.
Wait a short while until the vehicle temperature goes down.
A
TAS200 47