Table of Contents
Advertisement
About handling the iPod
About iPod settings
— operations may vary depending on the
software version of iPod
— the iPod Equalizer setting set by the
iPod is not used
— the Shuffle function of the iPod is
operated as Random on this unit.
ò Caution:
Store the data into another media,
to avoid losing the data during iPod
operation with this unit.
Do not allow direct sunlight to fall on
the iPod when it is not being used.
Extended exposure to direct sunlight
can result in iPod malfunction due to
the resulting high temperatures.
Do not leave the iPod in high
temperatures or direct sunlight.
Fix the iPod securely when using
with this unit. Do not let the iPod fall
onto the floor, where it may become
jammed under the brake or accelerator
pedal.
For details, refer to your iPod Owner's
Manual.
About iPod software version
The iPod software versions that can
be used with this unit are as follows
(operations verified as of June 2009):
iPod (5th generation)
iPod classic (1st generation)
iPod classic (2nd generation)
iPod nano (1st generation)
iPod nano (2nd generation)
iPod nano (3rd generation)
iPod nano (4th generation)
iPod touch (1st generation)
iPod touch (2nd generation)
iPhone 3G
ó Note: No guarantee applies to iPod
operations and future updated
versions of iPod software.
Connecting the iPod
Connect the USB connector
Connect the iPod as indicated in the figure
below using a USB cable.
iPod with Dock connector port
Dock connector
When connecting the iPod, remove a
headphone cable from the iPod.
*1 It is recommended to use a USB cable which satisfies USB 2.0
standards.
A
ver: 1.3
ver: 1.1.2
ver: 2.0.1
ver: 1.3.1
ver: 1.1.3
ver: 1.1.2
ver: 1.0.3
ver: 2.2.1
ver: 2.2.1
ver: 2.0
USB port
TAS200
25
Advertisement
Table of Contents
