Maintenance; Initial Maintenance; Periodic Maintenance - Victory Hammer S Owner's Manual

Proper maintenance assures the highest level of safety, durability and dependability for your
motorcycle.
• Have your VICTORY dealer perform the initial maintenance procedures when the motor-
cycle's odometer registers 500 miles (800 km).
• Review the safety-related maintenance information. See page 14.
• Perform the recommended periodic maintenance at the intervals specified in the periodic
maintenance table. See page 46.

Initial Maintenance

Performing initial maintenance will help ensure optimum engine performance for the entire
service life of the engine. Your dealer will change engine oil, inspect all fluids and service-
able components, ensure that all fasteners are tightened and make other adjustments as
needed.
Major Maintenance
For major repair information, refer to the VICTORY Service Manual. Major repairs typically
require technical skills and specially designed tools. Emission system service requires spe-
cial tools and training and should be performed by your dealer.

Periodic Maintenance

Always position the motorcycle on a firm level surface before performing service. Inspect,
clean, lubricate, adjust and replace parts as necessary. When inspection reveals the need for
replacement parts, use genuine VICTORY parts available from your VICTORY dealer.
Record service and maintenance information in the Maintenance Record. See page 89.
Perform maintenance at the intervals specified in the periodic maintenance table. See page
46. Perform the procedures more frequently if normal use of the motorcycle includes:
• high speed operation for extended periods
• low speed operation for extended periods
• operation in dusty or otherwise adverse conditions
Before beginning any maintenance procedure, read the instructions for the entire procedure.
During some procedures you may use potentially hazardous products such as oil or brake
fluid. Always follow the instructions and warnings on the product packaging.
WARNING! Improperly installed or adjusted components can make the motorcycle unstable or hard to
handle. Improperly installed electrical components can cause engine or electrical system failure. In
either event, damage or serious injury could result. If you do not have the time, tools and expertise
necessary to complete a procedure properly, please see your dealer for service.
Road Tests
Before returning the motorcycle to regular use, perform a road test in a safe area. Pay special
attention to the proper fit and operation of all serviced components. Make any corrections or
additional adjustments promptly to ensure safe, reliable and enjoyable vehicle performance.

Maintenance

45