What To Do If - AEG BE7314401 User Manual

WHAT TO DO IF...

WARNING!
Refer to "Safety information" chapter.
Problem
The appliance does not heat up
The appliance does not heat up
The appliance does not heat up
The appliance does not heat up
The appliance does not heat up
The oven lamp does not oper-
ate
The display shows F102
The display shows an error code
that is not in this list
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
The appliance is deactivated
The time of day is not set
The necessary settings are not
set
The automatic switch-off is ac-
tivated
The fuse is released
The oven lamp is defective
The door lock is defect
There is an electronic error
What to do if...
Solution
Activate the appliance
Set the clock. Refer to "First
setting the time of day"
Make sure, the settings are cor-
rect
Refer to „Automatic switch-
off"
Make sure, if the fuse is the
cause for the malfunction. If
the fuse releases again and
again, refer to an authorized
electrician
Replace the oven lamp.
• Close the door correctly
• Deactivate the appliance
with the house fuse or the
safety switch in the fuse box
and activate it again
• If the display shows F102
again, refer to the Service
Center
• Deactivate the appliance
with the house fuse or the
safety switch in the fuse box
and activate it again
• If the display shows the er-
ror code again, refer to the
Service Center
.........................................
.........................................
.........................................
27