Need Help - Philips SBC SC450 Instructions For Use Manual

System check lights
(11, 21) flashing
green/red
Parent Unit reacts
tooslow/late on
baby's sound
Parent Unit reacts
too quickly on other
ambient sounds
Units are out of range or there is
interference from another
FM source.
Baby Unit is not switched on.
Microphone sensitivity on Baby Unit
is set too low.
Baby Unit too far away from baby.
Microphone sensitivity on Baby Unit
is set too high.
Baby Unit too far away from baby.
Philips Consumer Electronics, B.U. Peripherals & Accessories, hereby
declares that this SBC SC450 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.

Need Help?

If you have any questions about the SBC SC450, please contact our helpline
for assistance! You can find the number in the list on page 2.
Before you call, please read this manual carefully.
You will be able to solve most of your problems.
The model number of the baby monitor is SBC SC450.
Date of purchase:
Move units closer together to restore the
link and wait 10-30 seconds for
confirmation (green SYSTEM CHECK lights
(11,21) give a steady light).
Remove the other FM source.
Press Power button (3).
Adjust the microphone sensitivity of the
Baby Unit to a higher level, using
the microphone sensitivity control (8).
Move Baby Unit closer to baby.
Adjust the microphone sensitivity of the
Baby Unit to a lower level, using the
microphone sensitivity control (8).
Move Baby Unit closer to baby.
_____ /_____ /______
day /month /year
ENGLISH
13