Technical Specifications - Philips SBC SC450 Instructions For Use Manual

Replacing the small Parent Unit's battery pack
1
Open the small Parent Unit's battery compartment cover (29).
2
Disconnect the old battery pack from the power plug and remove.
3
Carefully connect the new battery pack to the power plug and place
inside the battery compartment.
4
Close battery compartment cover (29).
•
Remove the battery-pack from the Parent Unit if it is not used for long
periods of time.
Batteries
Dispose of used batteries in an environmentally friendly manner.
Do not mix old and new batteries, or different types of batteries.
Remove Baby Unit batteries if the baby monitor is not to be used for long
periods.

Technical specifications

Power supply:
Operating range:
Operating temperature: 10 °C to 40 °C
Digital pilot tone:
Transmission
frequencies
– Battery pack; rechargeable NiMH for small
Parent Unit (included).
– Optional batteries 4x 1.5V; AA for Baby Unit
and big Parent Unit (not included)
– AC power adapter 230V AC, 50 Hz (three
included): - Output voltage 9V DC, 200mA.
Up to 200 metres in ideal conditions (walls,
floors, etc. can limit this distance).
Continuous communication link (hidden
signal helps reduce interference and ensures
a continuous link between both units so you
only hear your baby's sounds).
SBC SC450/00/05/84:
from 40.695 to 40.675 MHz
ENGLISH
11