Changing The Wake Area Sensitivity Level - Honeywell DCS19W Installation And User Manual

Changing the Wake Area Sensitivity Level (Photocell LED Range Adjust)
The MS2400 Series bar code scanner wake area sensitivity level can be set to the end users preference by
scanning one of the Photocell Sensitivity adjustment bar codes below.
*Max Photocell
Sensitivity
³ 2 2 1 2 0 0
Low Photocell
Sensitivity
³ 2 2 1 2 2 0
* MS2400 Series Bar Code Scanner Default Setting
32
This feature enables the MS24xx to be at max
sensitivity or far sensing for the wake up photo
transistor.
* This is the default setting.
This feature enables the MS24xx to be at a
medium 1 sensitivity or medium sensing for
the wake up photo transistor.
This feature enables the MS24xx to be at a
low sensitivity or low sensing for the wake up
photo transistor.
This feature enables the MS24xx to be at the
lowest sensitivity (close only) for the wake up
photo transistor.
Medium Photocell
Sensitivity
³ 2 2 1 2 1 0
Min Photocell
Sensitivity
³ 2 2 1 2 3 0