Changing The Wake Area Sensitivity Level - Honeywell MS2421 Installation And User Manual

Wake Activation Area Sensitivity (Photocell LED Output Range)
Changing the Wake Area Sensitivity Level (Photocell LED Range Adjust)
The MS2400 Series bar code scanner wake area sensitivity level can be set to the end users preference by
scanning one of the Photocell Sensitivity adjustment bar codes below.
*Max Photocell
Sensitivity
³ 2 2 1 2 0 0
Low Photocell
Sensitivity
³ 2 2 1 2 2 0
* MS2400 Series Bar Code Scanner Default Setting
34
This feature enables the MS24xx to
be at Max sensitivity or far sensing
for the wake up photo transistor.
* This is the default setting.
This feature enables the MS24xx to
be at a low sensitivity or low sensing
for the wake up photo transistor.
This feature enables the MS24xx to
be at a medium 1 sensitivity or
medium sensing for the wake up
photo transistor.
This feature enables the MS24xx to
be at the lowest sensitivity (close
only) for the wake up photo
transistor.
Medium Photocell
Sensitivity
³ 2 2 1 2 1 0
Minimum Photocell
Sensitivity
³ 2 2 1 2 3 0