Replacing The Rdx Drive - IBM RDX User Manual

Table 5. Reorder list (continued)
Description
RDX 750 GB cartridge
RDX 1 TB cartridge

Replacing the RDX drive

To remove the internal RDX drive, complete the following steps:
1. Read the safety information that begins on page v and "Handling
static-sensitive devices" on page 7.
2. Eject and remove the cartridge from the drive dock.
3. Make sure that the server is turned off and that the power cord is disconnected.
4. Remove the server covers, using the instructions that came with the server.
5. Disconnect the power cord from the drive dock.
6. Disconnect the USB cable from the drive dock.
7. Remove the drive dock from the bay, using the drive-installation instructions
that came with your server.
Reorder part number
46C2334
46C2335
Chapter 3. Using the RDX drive
17