Getting Started - Philips 190S8 Electronic User's Manual

Your LCD Monitor :
• Front View Product
Description
• Setting Up and Connecting
Your Monitor

• Getting Started

• Optimizing Performance
Getting Started
Getting Started
Use the information file ( .inf) for Windows® 95/98/2000/Me/XP/Vista or later
The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for
Windows® 95/98/2000/Me/XP/Vista. This information file ( .inf) should be installed in order that
your Philips monitor can be enabled from the 'Monitor' dialog box in Windows® 95/98/2000/Me/
XP/Vista and the Plug & Play application can be activated. The installation procedure based on
Windows® '95 OEM Release 2 , 98 , 2000, Me, XP and Vista is specified as follows.
For Windows® 95
1 .
Start Windows® '95
2 .
Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3 . Double click on the 'Display' Icon.
4 . Select the 'Settings' tab then click on 'Advanced...'.
5 .
Select the 'Monitor' button, point to 'Change...' then click on 'Have Disk...'.
6 .
Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click
on the 'OK' button.
7 . Click on the 'OK' button then select your monitor model and click on 'OK'.
8 . Click on the 'Close' button.
For Windows® 98
1 .
Start Windows® 98
2 .
Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3 . Double click on the 'Display' Icon.
4 .
Select the 'Settings' tab then click on 'Advanced...'.
5 .
Select the 'Monitor' button, point to 'Change...' then click on 'Next'
6 .
Select 'Display a list of all the drivers in a specific location, so you can choose the driver
you want.' then click on 'Next' and then click on 'Have Disk...'.
7 . Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click
on the 'OK' button.
8 .
Click on the 'OK' button then select your monitor model and click on the 'Next' button.
9 .
Click on the 'Finish' button then the 'Close' button.
For Windows® 2000
1 . Start Windows® 2000
2 .
Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.