Troubleshooting - Philips 190S8 Electronic User's Manual

Troubleshooting

• Safety and
Troubleshooting
• FAQs
This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these
• Common Problems solutions, contact Philips customer service representative.
• Imaging Problems
Common Problems
• Regulatory Information
• Other Related Information
Having this problem
No Picture
(Power LED not lit)
No Picture
(Power LED is amber or yellow)
Screen says
AUTO button not working properly
Imaging Problems
Display position is incorrect
Image vibrates on the screen
Check these items
Make sure the power cord is plugged into the power outlet
%Ï
and into the back of the monitor.
First, ensure that the power button on the front of the monitor
%Ï
is in the OFF position, then press it to the ON position.
Make sure the computer is turned on.
%Ï
Make sure the signal cable is properly connected to your
%Ï
computer.
Check to see if the monitor cable has bent pins.
%Ï
The Energy Saving feature may be activated
%Ï
Make sure the monitor cable is properly connected to your
%Ï
computer. (Also refer to the Quick Set-Up Guide).
Check to see if the monitor cable has bent pins.
%Ï
Make sure the computer is turned on.
%Ï
The Auto Function is designed for use on standard Macintosh
%Ï
or IBM-compatible PCs running Microsoft Windows.
It may not work properly if using nonstandard PC or video
%Ï
card.
Press the Auto button.
%Ï
Adjust the image position using the Phase/Clock of More
%Ï
Settings in OSD Main Controls.
Check that the signal cable is properly connected to the
%Ï
graphics board or PC.