Table of Contents
Advertisement
VXP 12.2Q
DIMENSIONAL DRAWINGS
780.0
[30.71"]
190.0
60°
[7.48"]
Architect's and Engineer's specifications
The loudspeaker shall consist of a 305 mm (12") full-range, point source Power Dual transducer and a discrete 305 mm (12") bass driver. The
low and high frequency elements shall be driven by an integrated single-channel Class D amplifier through an internal passive crossover network
operating at 1.5 kHz. A low-pass filter operating at 300 Hz shall limit midrange response of the bass driver to prevent destructive interference. The
amplifier module shall incorporate an auto power down (APD) circuit that places the loudspeaker in standby mode with less than 1 W power
consumption when input signal is absent for more than 20 minutes, resuming full operation when signal is again present at the input.
Performance of the loudspeaker shall meet or exceed the following criteria: Frequency response measured at 1 metre on axis with swept sine wave
shall be 60 Hz to 25 kHz (3 dB) in full-range mode and 100 Hz to 25 kHz in high-pass mode. Rated average SPL shall be 125 dB (anechoic) on axis
at 1 metre. The dispersion of the loudspeaker shall be 75 degrees horizontal by 40 degrees vertical (-6 dB).
The enclosure shall be an optimally tuned 57 litre vented 15 mm (0.62") birch plywood cabinet with 18 mm (0.71") birch plywood front baffle.
Connectors shall be 1 x female XLR (input), 1 x male XLR (link) and 1 x Neutrik powerCON. The speaker shall be fitted with the following controls
and indicators: level control, blue power LED, green signal LED, red limit LED, full range / high pass switch (110 Hz) and a power switch. The
enclosure shall be fitted with 8 x integral M10 inserts for flying hardware, 8 x M10 yoke bracket inserts and an integrated carrying handle. There
shall be a blanking plate for an optional pole mount adaptor.
The enclosure shall not exceed the following dimensions: 780 x 370 x 360 mm or 30.7 x 14.6 x14.1" (H x W x D). The loudspeaker shall be the
Tannoy VXP 12.2Q.
Tannoy (Direct UK)
T: +44 (0) 1236 420199
TCGI (ROW sales)
T: +45 8742 7000
TCGA (Americas sales)
T: +1 (519) 745 1158
Tannoy Middle East
T: +971 (04) 4401208
370.0
[14.57"]
290.0
[11.42"]
180.0
[7.09"]
40°
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
40.0
190.0
[1.57"]
[7.48"]
155.0
[6.10"]
180.0
[7.09"]
40.0
[1.57"]
155.0
[6.10"]
258.0
[10.16"]
VXP 12.2Q // issue 1.00 // 20.02.12
Advertisement
Table of Contents
