Milwaukee 5371-20 Operator's Manual page 9

For a complete listing of accessories refer to your
catalog, contact your local distributor or a service center.
These carbide-tipped bits are specially designed for drilling through con-
crete and masonry. They are made with round shanks for use with
Hammer-Drills. Alloy steel shanks and bodies provide durability and long
life. The wide spiral with shallow oval flutes removes dust quickly to
assure maximum drilling efficiency.
1/8" 48-20-6800
3/16" 48-20-6805
3/16" 48-20-6806
1/4" 48-20-6810
1/4" 48-20-6811
5/16" 48-20-6815
5/16" 48-20-6816
3/8" 48-20-6820
3/8" 48-20-6821
3/8" 48-20-6823
7/16" 48-20-6825
1/2" 48-20-6830
1/2" 48-20-6833
9/16" 48-20-6835
5/8" 48-20-6840
5/8" 48-20-6843
3"
4"
6"
4"
6"
4"
6"
4"
6"
13-1/2"
6"
6"
13-1/2"
6"
6"
13-1/2"
Electric Tool catalog or go on-line to www.milwaukeetool.com. To obtain a
Cat. No. 48-55-0711
Cat. No. 48-55-5378
Cat. No. 48-76-4008
Cat. No. 48-76-4025
Cat. No. 48-66-3280
Cat. No. 48-66-4040
Cat. No. 48-66-1365
Cat. No. 48-66-0600