Milwaukee 5371-20 Operator's Manual page 2

1.
accidents.
2.
Power tools create sparks which may ignite the dust or fumes.
3.
Distractions can cause you to lose control.
4.
will reduce risk of electric shock.
5.
increased risk of electric shock if your body is earthed or grounded.
6.
entering a power tool will increase the risk of electric shock.
7.
cords increase the risk of electric shock.
8.
use reduces the risk of electric shock.
9.
A moment of inattention while operating power tools
may result in serious personal injury.
10.
equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce per-
sonal injuries.
11.
the switch or plugging in power tools that have the switch on invites
accidents.
12.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
13.
This enables better control of the power tool in unexpected
situations.
14.
Loose clothes, jewellery, or long hair can be caught in moving parts.
15.
Use of these devices can reduce dust-re-
lated hazards.
Cluttered or dark areas invite
Unmodified plugs and matching outlets
There is an
Damaged or entangled
Use of a cord suitable for outdoor
Carrying tools with your finger on
16.
safer at the rate for which it was designed.
17.
Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
18.
preventive safety measures reduce the risk of starting the tool acci-
dentally.
19.
ous in the hands of untrained users.
20.
Water
by poorly maintained power tools.
21.
tools with sharp cutting edges are less likely to bind and are easier
to control.
22.
the power tool for operations different from those intended could
result in a hazardous situation.
23.
the safety of the power tool is maintained.
Safety
The correct power tool will do the job better and
Power tools are danger-
Many accidents are caused
Properly maintained cutting
This will ensure that
Such
Use of