Changing The Way You Are Warned; Reporting A New Safety Camera - TomTom GO Reference Manual

Symbol shown on
map

Changing the way you are warned

To change the way your TomTom GO navigation device warns you about safety cameras, select the
Sounds and Warnings button in the Settings Menu.
You can then set how you want to be warned for the different types of cameras and safety hazards.
You can change settings for whether you want to be warned, never warned or warned only if you are
speeding.
For example, to change how you are warned when you approach a safety camera, do the following:
1. Select Sounds and Warnings in the Settings Menu.
2. Select Safety camera warnings.
3. Select Safety cameras.
4. Select whether you always want to be warned or warned only when you are speeding. Select
Never to turn off the warning.
5. Select the back button.
Tip: To turn off all audible warnings, select Settings, followed by Sounds and Warnings and then
switch off Warning sounds.

Reporting a new safety camera

If you pass a new safety camera that you were not warned about, you can report it instantly.
Note: You must be connected to TomTom services in order to report a safety camera.
To report a safety camera, do the following:
1. Select the Main Menu button to open the Main Menu.
2. Select Report Safety Camera.
You see a message thanking you for adding the camera.
Tip: If you make a mistake when reporting a camera, select Cancel in the message.
The safety camera is saved on your device automatically and also shared with other users.
Symbol shown in
route bar
Description
Traffic jams - warnings are given in the route bar
for traffic jams.
69