Changing The Way You Are Warned; Reporting A New Safety Camera - TomTom GO 4FB40 Reference Manual

Changing the way you are warned

To change the way you are warned about safety cameras, select the Sounds and Warnings button in
the Settings menu.
You can then set how you want to be warned for the different types of cameras and safety hazards.
You can change settings for whether you want to be warned, never warned or warned only if you
are speeding.
For example, to change how you are warned when you approach a safety camera, do the following:
1. Select Sounds and Warnings in the Settings Menu.
2. Select Safety camera warnings.
3. Select Safety cameras.
4. Select one of the following warning options:
Always.

Only when speeding.

Never.

5. Select the back button.
Tip: To turn off all audible warnings, select Settings, followed by Sounds and Warnings and then
turn off Warning sounds.

Reporting a new safety camera

If you pass a new safety camera that you were not warned about, you can report it instantly.
Note: To report a safety camera, you must be
your MyTomTom account.
You can report a safety camera in two ways:
Using the quick menu to report a safety camera
1. Select the current location symbol or the speed panel in the guidance view.
2. Select Report Safety Camera from the pop-up menu.
You see a message thanking you for adding the camera.
Tip: If you make a mistake when reporting a camera, select Cancel in the message.
The safety camera is saved on your GO automatically and also sent to other users.
Using the Main Menu to report a safety camera
1. Select the Main Menu button to open the Main Menu.
connected to TomTom services
80
and logged in to