Unified Services Router
Chapter 6. Utility commands used in
The command util ? at the CLI prompt would give the description of all the utility commands in
the branch util, which is as follows:
Sl No
Command Name
1
util ping
2
util restore_factory_defaults
3
util reboot
6.1 util ping <ip_address>
Sl No
Command Name
1
ip_address
6.2 util system_check capturePackets
Sl No
Command Name
1
download
2
Start
3
Stop
6.3 util system_check
Sl No
Command Name
1
display_IPV4_routingtable
6.4 util system_check dns_lookup
Sl No
Command Name
1
dns
6.5 util system_check traceroute
Sl No
Command Name
1
ip_address
CLI
Description
Ping target IP address.
Description
Download the packet capture to the
host machine
Start the packet capture
Stop the packet capture
Description
Display IPV4 Routing Table
Description
Internet name
Description
It displays all the routers present
15
Purpose
Ping or Trace an IP Address.
Revert to factory default settings.
Reboot the system
Type and Description
IP Address,
Ping target IP address.
Type and Description
Download the packet capture to the
host machine
Specify the interface (WAN1,
WAN2 and LAN)
Type and Description
Display IPV4 Routing Table
Type and Description
String
IP address
DNS
Type and Description
String
CLI Reference Guide