Net Wan Wan1-Pppoeprofile Delete Prof_Name; Net Wan Wan2-Pppoeprofile Delete Prof_Name; Net Wan1 Ipv6 Configure - D-Link DSR-250 Cli Reference Manual

Unified Services Router
Sl No Command Name
6 primary_dns
7 secondary_dns
8 get_ip_from_isp
9 static_ip
10 subnet_mask
11 Service
12 cancel
13 exit
14 save
8.39 net wan wan1-pppoeprofile delete
prof_name
Deletes wan1 pppoe profile
8.40 net wan wan2-pppoeprofile delete
prof_name
Deletes wan2 pppoeprofile

8.41 net wan1 ipv6 configure

Sl No Command Name
1 Dhcpc
stateless_mode_enable
2 isp type
3 Static
gateway_address
4 static ip_address
Description
ISP otherwise Enter No and give valid
static dns addresses
Valid primary DNS Server IP Address
Valid secondary DNS Server IP
Address
Getting the ip mode type weather to get
from ISP or static IP
Setting static ip address if not obtaining
the IP from ISP
Setting Subnet Mask if not obtaining
from ISP
Setting optional service name
Roll back wan configuration changes
Save wan configuration changes and
exit current mode
Save wan configuration changes
Description
Stateless mode configuration
Set type of connection used
static/dhcpc
Set ipv6 gateway address
set ipv6 address
41
CLI Reference Guide
Type and Description
Enter Yes to get dns dynamically
from ISP otherwise Enter No and
give valid static dns addresses
IP Address,
Primary dns
IP address,
Secondary dns
Boolean Choice(Y/N)
IP address
Static Ip
IP address
Subnet Mask
String type
Type and Description
stateless mode configuration.
(StatelessAddrAutoConfig/Stateful
AddrAutoConfig)
Isp type,
Static/dhcpc
IP Address
Gateway address
IP Address,
Static address