Net Wan Wan2 Ipv6 Configure - D-Link DSR-250 Cli Reference Manual

Unified Services Router
Sl No Command Name
5 static prefix
6 static primary_dns
7 static secondary_dns
8 Cancel
9 Exit
10 Save

8.42 net wan wan2 ipv6 configure

Sl No Command Name
1 Dhcpc
stateless_mode_enable
2 Dhcpc
prefix_delegation_enable
3 isp type
4 Static
gateway_address
5 static ip_address
6 static prefix
7 static primary_dns
8 static secondary_dns
9 pppoe username
10 pppoe password
11 pppoe authOpt
12 pppoe dhcpv6_opt
Description
set prefix length
Set ipv6 primary dns address
Set ipv6 secondary dns address
Roll back wan configuration changes
Save wan configuration changes and
exit current mode
Save wan configuration changes
Description
Stateless mode configuration
Prefix del egation configuration,
Set type of connection used
static/dhcpc/PPPoE
Set ipv6 gateway address
set ipv6 address
set prefix length
Set ipv6 primary dns address
Set ipv6 secondary dns address
Enter the username to authenticate
Enter the password to authenticate
Setting authentication options
Enter the dhcpv6 option for configuring
additional parameters
42
CLI Reference Guide
Type and Description
Integer,
Prefix length
IP Address,
Primary dns
IP Address,
Secondary dns
Type and Description
stateless mode configuration.
(StatelessAddrAutoConfig/StatefulA
ddrAutoConfig)
Boolean Choice(Y/N)
Isp type,
Static/dhcpc/PPPoE
IP Address
Gateway address
IP Address,
Static address
Integer,
Prefix length
IP Address,
Primary dns
IP Address,
Secondary dns
String,
Alphanumeric username
String,
Alphanumeric username
Authentication option types
like(Auto/PAP/CHAP/MS-
CHAP/MS-CHAPv2)
Dhcpv6 options (Disable-
Dhcpv6/Stateless-Dhcpv6/Stateful-
Dhcpv6/Stateless-Dhcpv6-
PrefixDelegation)