Commands And Their Descriptions; Utility Commands - D-Link DAP-2690 Reference Manual

When you enter a command without a variable or value that needs to be specified, the CLI will prompt you
with further information about what is needed to complete the command.
For example, if you type in snmp delcomm, the missing value, CommunityString<string>, is displayed in
order so that you can complete the instruction.

Commands and their Descriptions

Utility Commands

help
ping
set factorydefault
reboot
ssl freset
get bootcodeinfo
version
get cpuinfo
get meminfo
get hardware
get macaddress
get country
get pingctl
get inact
set pingctl
get uptime
get time
pwd
Display CLI Command List
Send ICMP ECHO_REQUEST to network hosts
Restore to factory default setting
Reboot Access Point. It is necessary to reboot the AP after
making Configuration changes for those changes to take effect.
Use freset to factorydefault
Display bootcode information
Displays the currently loaded firmware version
Display cpu info percentage
Display mem info percentage
Display Hardware Revisions
Display Mac address
Display Country
Display Ping Control state
Display the value of a specific inact
Set Ping Control
Display UpTime
Display time
Print name of current/working directory