Chapter 10. Configuration Commands Under Branch System; System Logging Facility Configure <Facility; System Logging Ipv4 Configure - D-Link DSR-250 Cli Reference Manual

Unified Services Router
Chapter 10. Configuration commands
10.1 system logging facility configure <facility>
Sl No Command Name
1 system logging facility
configure <facility>
2 level_options_set <level>
<level_options> <enable>

10.2 system logging ipv4 configure

Sl No Command Name
1 bandwidth_limit_logs
<bandwidthLimitLogs>
2 broadcast_or_multicast_traffic
_logs
<broadcastOrMulticastTraffic
>
3 lan_wan_accept_packet_logs
<acceptedPkts>
4 lan_wan_drop_packet_logs
<droppedPkts>
5 source_mac_filter_logs
<sourceMacFilter>
6 unicast_traffic_logs
<unicastTrafficPkts>
7 wan_lan_accept_packet_logs
<acceptedPkts>
8 wan_lan_drop_packet_logs
<droppedPkts>
9 cancel
10 save
11 exit
under branch SYSTEM
Description
Facility type to configure.
Set level options. This command can
be
Description
Bandwidth Limit logs Enable/Disable
All Broadcast/Multicast Traffic logs
Enable/Disable
lan to wan accepted Pkts
Enable/Disable
lan to wan dropped Pkts
Enable/Disable
Source mac filter logs Enable/Disable
All Unicast Traffic logs Enable/Disable
wan to lan accepted Pkts logs
Enable/Disable
wan to lan dropped Pkts logs
Enable/Disable
Roll back logging configuration
changes.
Save logging configuration changes.
Save logging configuration changes
and exit current mode.
55
CLI Reference Guide
Type and Description
Facility types,
Kernel/System/Local0-
Wireless/Local1-UTM
Level identifier types,
Emergency/Alert/Critical/Error/War
ning/Notification/Information/Debug
ging
Logging level options,
Display_In_Event_Log/Send_to_sy
slog
Enable, Enable/Disable this logging
option. (Y/N)
Type and Description
Boolean Choice (Y/N)
Boolean Choice (Y/N)
Boolean Choice (Y/N)
Boolean Choice (Y/N)
Boolean Choice (Y/N)
Boolean Choice (Y/N)
Boolean Choice (Y/N)
Boolean Choice (Y/N)