MSI G52-74111X2 Manual page 51

Bootup Num-Lock
This setting is to set the Num Lock status when the system is powered on.
Setting to [On] will turn on the Num Lock key when the system is powered on.
Setting to [Off] will allow users to use the arrow keys on the numeric keypad.
Wait For 'F1' If Error
This BIOS feature controls the system's response when an error is detected
during the boot sequence. W hen enabled, the BIOS will halt the boot sequence
when an error is detected. You will need to press the F1 button at this point. It
brings you to the BIOS setup menu where you can adjust the settings to fix the
problem. W hen disabled, the BIOS will not halt the boot sequence, even when
an error is detected. The system will continue to boot into the operating system.
Boot Device Priority
Press <Enter> and the following sub-menu appears:
1st/ 2nd Boot Device
These items allow you to set the s equence of boot devices where BIOS
attempts to load the operating system.
Hard Disk Drives
Press <Enter> and the following sub-menu appears:
1st Drive
This item allows you to set the type of hard disk drives installed.
BIOS Setup
3-19