MSI G52-74111X2 Manual page 43

SuperIO Configuration
Press <Enter> and the following sub-menu appears:
Serial Port1 Address
This item specifies the base I/O port address of the onboard Serial Port 1 (COM
A). Select [Auto] allows AMI
I/O port address. Setting options: [3F8/ IRQ4], [2F8/ IRQ3], [3E8/ IRQ4], [2E8/
IRQ3] and [Disabled].
Serial Port1 M ode
This item allows you to specify the operation mode for serial port1. Setting
options: [Normal], [IrDA], [ASKIR].
[Normal]
[IrDA]
[ASKIR]
OnBoard CIR Port
This item is used to Enable or Disable OnBoard Consumer Remote Control (TV
remote IR).
Chassis Intrusion
The field enables or disables the feature of recording the chassis intrusion
status and issuing a warning message if the chassis is once opened. To clear
the warning message, set the field to [Reset]. The setting of the field will
automatically return to [Enabled] later.
BIOS to automatically determine the correct base
®
RS-232C Serial Port
IrDA-compliant Serial Infrared Port
Amplitude Shift Keyed Infrared Port
BIOS Setup
3-11