MSI G52-74111X2 Manual page 19

Installing CPU Cooler Set
When you are installing the CPU, make sure the CPU has a heat sink and a cooling fan
attached on the top to prevent overheating. If you do not have the heat sink and
cooling fan, contact your dealer to purchase and install them before turning on the
computer.
Important
1. Read the CPU status in BIOS (Chapter 3).
2. Mainboard photos shown in this section are for demonstration of the
CPU/ cooler installation only. The appearance of your mainboard may
vary depending on the model you purchase.
1. Position the cooling set onto the
retention mechanism. Hook one
end of the clip to hook first.
3. Fasten down the lever.
Hardware Setup
2. Then press down the other end
of the clip to fasten the cooling
set on the top of the retention
mechanism. Locate the Fix Lever
and lift up it.
Fixed Lever
4. Attach the CPU Fan cable to the
C P U f a n c on n ec t or on t h e
mainboard.
2-5