Reader Id And Firmware Version - Code 2600 User Manual

15.0 - Reader ID and Firmware Version

To find out the Reader ID and firmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read the
following code:
You will see a text string indicating your firmware version and CR2600 ID number (see below):
iVVVVWWWWXXXXSSSSSSSSSSAOODYYYYHHIIIIJJJJKKKKLLLL<TAB>Z...Z
i
indicates 'I' string output;
VVVV is the application firmware version number;
WWWW is the core application firmware version number;
XXXX
is reserved for the radio firmware version number;
SSSSSSSSSS is the Reader's serial number (ten digits);
A is the current execution state:
OO is the OEM identifier;
D is the display type:
YYYY is the flash file system version number. Reserved;
HH is the hardware revision;
IIII is the hardware type identifier: 0009 indicates a CR2600
JJJJ is the boot application version;
KKKK is the operating system kernel version;
LLLL is the root file-system version;
<TAB> is the ASCII TAB character;
Z...Z is the OEM decoder version: a null terminated string of printable ASCII characters. Without a decoder.ini file, the order
of the decoders listed here indicates the order of use.
Example: Xap/i3000300006040010002363A06D-SD+SQ
Note: Code will periodically release new firmware for CR2600 readers. For information on latest firmware versions, call Code
at (801) 495-2200. To upgrade firmware, please visit our website at http://www.codecorp.com/codesupport.php and follow
instructions provided.
Reader ID and Firmware
"A" means core is running
"B" means undefined
"C" means undefined
"0" or "N" is no display device
"D" is the standard Keypad/Display
C007964_01_CR2600_User_Manual
9