Technical Specifications - HP JG640A Quickspecs

QuickSpecs

Technical Specifications

HP 830 24-Port PoE+ Unified Wired-WLAN Switch (JG640A)
I/O ports and slots
Additional ports and slots 1 RJ-45 serial console port
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
Safety
Emissions
Immunity
Management
Features
24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 SFP dual-personality ports; Duplex: full only; (4 10/100/1000BASE-T and 1000BASE-X Gigabit Ethernet
combination)
2 extended module slots
Dimensions
Weight
Processor
EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Switch fabric speed
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Maximum heat
dissipation
AC Voltage
Maximum power rating
Idle power
PoE power
Notes
UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1; FDA 21 CFR Subchapter J
EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; AS/NZS CISPR 22 Class A; EN
61000-3-2; EN 61000-3-3; VCCI-3 CLASS A; VCCI-4 CLASS A; ETSI EN 300 386; FCC Part 15 (CFR 47) CLASS A
EN
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP
Manager; Telnet; HTTPS; RMON1; FTP; IEEE 802.3 Ethernet MIB; Ethernet Interface MIB
Default supported APs: 24
Maximum supported APs: 60 (via the optional purchase of the 12-Access Point E-LTU)
DA - 14560 Worldwide — Version 8 — June 10, 2014
HP 830 Unified Wired-WLAN Switch Series
17.32(w) x 16.89(d) x 1.72(h) in (44 x 42.9 x 4.36 cm) (1U height)
15.87 lb (7.2 kg)
Dual core @ 750 MHz, 1 GB flash, 512 MB DDR2 SDRAM
88 Gb/s
8000 entries
32°F to 113°F (0°C to 45°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
50/60 Hz
307 BTU/hr (323.89 kJ/hr)
100-240 VAC
90 W
53 W
370 W
Idle power is the actual power consumption of the device with no ports
connected. PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies and may be
supplemented with the use of an external power supply (EPS).
Internal power supply delivers PoE+ to a maximum of 11 ports. PoE+ can be
delivered to all 24 ports with the use of an optional redundant power system.
EN 55024, CISPR24 & ETSI EN 300 386
Page 15