Sharp MZ-700 Basic Manual page 81

SAVE
RUN
MERGE
VERIFY
AUTO
LIST
LISTIP
83
SAVE" FDl : DAY"
Names the BASIC text currently in the text area "DAY"
and writes in to floppy disk. One file with filename
"DAY" and file mode BTX is registered.
SAVE "CMT:E"
RUN
RUN 1000
RUN "FD1:F"
RUN "FD3:G"
MERGE
Names the BASIC text currently in the text area "E" and
writes in to the cassette tape.
Executes the program from the heading of the BASIC
text currently in the text area.
Note:
At the RUN command, all variables become 0 or null
immediately prior to program execution.
Executes program from statement number 1000.
Reads out BASIC program file "F" from floppy disk, and
executes program from the program heading.
Reads out program text "G" from volume number 7 of
the floppy disk in drive number 3, and then executes
program from the designated execution address. In this
instance, the system is not controlled by BASIC.
Adds the program in the file to the program.
MERGE "FDl :PR Merges program currently in the memory and "PROG"
OG
11
file in the floppy disk.
VERIFY"H"
AUTO
AUTO 200.20
LIST
LlST-50D
LlST/P
Compares program text currently in BASIC text area and
content of cassette tape file specified by file name "H".
Automatically generates line numbers 10, 20, 30 '" during
text making.
Automatically generates 200, 220, 240 ... in steps of 20,
from statement number 200.
AUTO command
is
released by pressing
I
SHIFT
I + hREAKI
keys.
Displays all lists of BASIC text currently in text area.
Displays list up to statement number 500.
Display list goes to printer. (TEXT MODE)