Summary Of Disk Basic Commands, Statements, Functions And Operations; Commands - Sharp MZ-700 Basic Manual

82
5.1 Summary of DISK BASIC Commands, Statements,
Functions and Operations
5.1.1 Commands
DIR
DIRIP
LOAD
DIR
DIR FD1
DIR
Displays floppy disk directory.
Information indicated at directory display is as follows:
Registered filemode, registration condition (locked or
not) and filename
Note:
For the directory display on the CRT screen, there is a
stop when one screen amount is displayed, and the cursor
appears. To continue the directory display the
~
key
can be pushed, or it is possible to move to another
command.
Displays the directory of the floppy disk in floppy disk
drive number 1. When the DIR command is executed, the
system memorizes that drive number, and thereafter the
drive number can be omitted to designate direct execution
commands and file access commands for that same floppy
disk drive.
Displays the directory of the floppy disk in the floppy disk
drive that was executed by the most recent DIR com-
mand.
DIR/P" FD1" Prints floppy directory on line printer.
LOAD" FD1 : DAY"
Reads out BASIC texqaofX) with "DAY" fife name in
floppy disk.
LOAD "FD2:SUN". Consider BSD file "SUN" file name in floppy disk drive
A number 2 as ASCII format and read it out.
LIMIT $DOOO: LOAD
For read-out of machine language program file (OBJ)
"B"
linked to a BASIC text, it is necessary to separate the
machine language area and the BASIC area by the LIMIT
command. Refer to the command used for linking with
the machine language program.