Load - Sharp MZ-700 Basic Manual

37
LOAD (load)
Reads out the program file.
Format:
LOAD" [<device name> :] <filename> " [<,A>]
Note: Only FDn or CMT device name
Abbreviatied form:
LO.
Explanation:
• Reads out program from external memory device.
• Specifies the file to be read out depending upon the <device name> and
<filename> description.
• If the device specified by the DEFAULT statement is designated, the <device
name> can be omitted.
• If option "A" is applied, BSD file is considered as ASCII format and is read in.
After read-in, time is required for conversion.
• The filename must not be omitted, but from cassette tape a call out is possible
even when the file name is omitted.
Examples:
LOAD "FD1 MZ - 700"
..... The file named "MZ-700" is read out from the floppy disk (drive number 1).
LOAD
"c
MT : MZ - 700 "
..... The file named "MZ-700" is read out from the cassette tape.
•