BenQ MK2442 User Manual page 38

Setting up User Picture mode
You can adjust the settings in the Picture menu and save them as your
Personal Picture Mode. You can press PICTURE on the remote control to select these
modes directly.
1. Press MENU to display the OSD menu on-screen.
2. Press ◄ or ► to select PICTURE, and then press OK to enter the PICTURE menu.
3. Press ▼ to select Picture Mode, and then press ◄ or ► to select User.
4. Press ▲ or ▼ to select Contrast, Brightness, Colour, Tint, Sharpness and then press ◄
or ► to adjust the settings to your satisfaction.
 When DCR is ON, Brightness and Contrast are not adjustable.
5. Press MENU to save the settings and close the OSD menu.
OSD (On-Screen Display) menu 35