Table of Contents
Advertisement
On-Chip IDE Controller
This item allows you to enable/ disable IDE Controller.
PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for
reading/ writing to IDE drives.
Serial-ATA 1/ 2
These items allow users to enable or disable the SATA controllers.
nVidia RAID Function
This item is used to enable/disable the nVidia RAID function for SATA devices.
SATA1 / SATA2 / SATA3 / SATA4
W hen the nVidia RAID Function sets to Enabled, these items will available.
These items allow users to enable or disable the RAID function for each SATA
hard disk drive.
I/O Device Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1
Select an address and corresponding interrupt for the first serial port.
Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides
Standard, ECP, and EPP features. It has the following options:
[Disabled]
[3BC]
[278]
[378]
Line Printer port 0
Line Printer port 2
Line Printer port 1
BIOS Setup
3-13
Hide quick links:
Advertisement
Table of Contents
