Eiki LC-WUL100A Owner's Manual page 48

Video Input
Offset (Red/Green/Blue)
Press the Point ◄ button to lighten red/green/blue tone
of the black level of an image; press the Point ► button
to deepen red/green/blue tone of the black level of an
image (from 0 to 63).
Sharpness
Press the Point ◄ button to decrease the sharpness
of the image; press the Point ► button to increase the
sharpness of the image (from 0 to 31).
Gamma
Use the Point ◄► buttons to adjust the gamma value
to obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced.
Press the Point ◄► buttons to change the noise
reduction mode.
Off ............. Noise reduction mode is Off.
On ............. Noise reduction mode is On.
Progressive
An interlaced video signal can be displayed in
progressive mode. Press the Point ◄► buttons to
change the progressive scan mode.
Off ............. Progressive scan mode is Off.
On ............. Progressive scan mode is On .
Film ........... For watching a film. With this function,
the projector reproduces pictures faithful
to the original film quality.
Reset
To reset the adjusted data, select Reset and press
the SELECT button. A confirmation box appears and
then select yes. All adjustments will return to their
previous figures.
Store
To store the adjusted data, select Store and press
the Point ► or the SELECT button. Use the Point
▲▼ buttons to select one from Images 1 to 10 and
press the SELECT button.
A confirmation box appears and then select yes.
Stored data can be called up by selecting an Image
(1-10) in the Image Mode Selection on page 46.
Note:
• Progressive cannot be selected when 480p,
575p, 720p, or 1080p is selected (p.45).
• Noise reduction cannot be selected with the
computer input and when the video signal format
is 1080p (p.45).
48
Image adjust Menu
Store
A confirmation box appears
and then select yes.