Axis M3027–PVE User Manual page 25

AXIS M3027–PVE Fixed Dome Network Camera
Live View Config
• Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the
PTZ control panel.
• Select Enable recording button to enable recording from the Live View page. This button is available when using the
AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control
(AMC), on page 11.
User Defined Links
To display user-defined links in the Live View page, select the Show custom link option, give the link a name and then enter the URL
to link to. When defining a web link do not remove the 'http://' from the URL address. Custom links can be used to run scripts or
activate external devices connected to the product, or they can link to a web page. Custom links defined as cgi links will run the
script in the background, in a hidden frame. Defining the link as a web link will open the link in a new window.
Output Buttons
External I/O devices connected to the Axis product's output ports can be controlled directly from the Live View page.
To display output buttons in the Live View page:
1. Go to Setup > Live View Config.
2. Under Output Buttons, select the type of control to use:
Pulse activates the output for a defined period of time. The pulse time can be set from 1/100 second to 60
-
seconds.
Active/Inactive displays two buttons, one or each action.
-
To configure the active and inactive states, go to System Options > Ports & Devices > I/O Ports and set the port's Normal state.
For more information about I/O ports, see I/O Ports, on page 49.
25