Deleting Custom Avoidances; Enabling Advanced Detours; Taking A Detour Around Specified Areas; Navigating Off Road - Kenwood DNX570TR Quick Start Manual

Deleting Custom Avoidances

1 Select Settings > Navigation > Custom
Avoidances.
2 Select an option:
• To delete all custom avoidances, select
• To delete one custom avoidance, select the
avoidance, and select

Enabling Advanced Detours

Select Settings > Navigation > Advanced
Detours.

Taking a Detour Around Specified Areas

You can take a detour for a specified distance
along your route or detour around specific roads.
This is useful if you encounter construction zones,
closed roads, or poor road conditions.
1 Select a destination, and select Go!
(page 14).
2 From the map, select
3 Select Next .5mi on Route, Next 2mi on
Route, Next 5mi on Route, or Detour by
Road(s) on Route.
4 If necessary, select a road to detour
around.

Navigating Off Road

If you are not following roadways as you navigate,
you can use Off Road mode.
1 Select Settings > Navigation.
2 Select Calculation Mode > Off Road > Save.
The route will be calculated as a straight
line to the location.
22 GPS Navigation Instruction Manual
.
> Delete.
> Detour