Dodge Dakota 2011 Owner's Manual page 102

100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Place/Retrieve A Call From Hold
To put a call on hold, press the
a single beep. This indicates that the call is on hold. To
bring the call back from hold, press and hold the
button until you hear a single beep.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the button until you hear a single beep,
indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at a
time.
Conference Call
When two calls are in progress (one active and one on
hold), press and hold the
double beep indicating that the two calls have been
joined into one conference call.
button until you hear
button until you hear a
Three-Way Calling
To initiate three-way calling, press the
while a call is in progress, and make a second phone call,
as described under "Making a Second Call While Current
Call is in Progress". After the second call has established,
press and hold the
beep, indicating that the two calls have been joined into
one conference call.
Call Termination
To end a call in progress, momentarily press the
button. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active call.
If the active call is terminated by the phone far end, a call
on hold may not become active automatically. This is cell
phone-dependent. To bring the call back from hold, press
and hold the button until you hear a single beep.
Redial
• Press the
button to begin.
button until you hear a double
button