Dixon SpeedZTR 30 ZTR Safety Instructions And Operator's Manual page 24

OPERATION INSTRUCTIONS
TESTING OF SAFETY INTERLOCK SYSTEMS:
Failure to observe the following testing instructions
could result in serious injury or death.
The following tests should be performed at the start
PARKING BRAKE SWITCH TEST:
a) Swing control levers to outward position.
b) Disengage blade drive.
c) Put parking brake in OFF position.
d) Turn ignition switch to START.
Engine should not turn over or attempt to start.
CONTROL LEVER SWITCH TEST:
a) Disengage blade drive.
b) Put parking brake in ON position.
c) Swing control levers inward.
d) Turn ignition switch to START.
Engine should not turn over or attempt to start.
NOTE: If any safety check fails, do not operate the
mower until the system has been checked and repaired
by an Authorized Dixon® Dealer.
of each mowing day.
24