Specifications - Dixon SpeedZTR 30 Safety And Operation Manual

Chassis:
Body:
Mower Deck:
Blade Drive:
Transmission:
Engine:
Starting
System:
Tires:
Capacities:
Dimensions:
Additional information may be provided elsewhere in this manual.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

SPECIFICATIONS

SpeedZTR™ 30
11 gauge welded steel tubular frame
Body parts are made of steel
11 gauge stamped steel construction. Single 30"
(76 cm) cut blade. Cut height approximately 1½"
(38mm)- 4" (102 mm) via seven position foot
pedal.
Mechanical; hand lever engagement.
Each rear wheel is independently driven by a
Hydro Gear EZT self contained hydrostatic drive.
13 HP Briggs & Stratton Intek, 4-cycle, single
cylinder, air-cooled, gasoline, vertical shaft,
aluminum head and block, cast iron sleeve, AVS
balanced.
Electric-key switch operation with safety interlocks
on park brake, steering levers and blade drive.
Front 11 x 4.00-5 smooth tread16-21 PSI
Rear 18 x 6.50-8 turf tread
Fuel
Engine Oil
Width
Width
Height
Length
Weight
1.8 gallon (6.8 liters)
1.25 quarts (1.2 liters)
34" (86 cm) outside rear wheel
measurement
40" (101 cm) overall width of
deck with deflector
38" (96 cm) to top edge of seat
67" (170 cm) hitch tab to front
470 lbs. (213 kg)
17
(110-145 kPa)
8-14 PSI
(55-97 kPa)