Cycle Selection; Drying Options; Plate Warmer; What Happens In Each Cycle - Hotpoint HDA6009 Use And Care Manual

Cycle Selection Hints
is important to follow the Loading instructions.
POTS & PANS—For items such as pots, pans
cookware, dishes and glasses with heavy soil.
Everyday dishes may be included.
NORMAL WASH—For loads of everyday dishes,
glasses and cookware with medium soils. Designed
to yield high performance on normal soils.

What Happens in Each Cycle

You' II hear occasional c1 icking sounds:
—Soft food disposer shredding action.
—Drain valve opening to pump water out.
—Timer control as cycle progresses.
—Detergent cup opening.
PANS
POTS &
1 I .4
NORMAL WASH
WATER SAVER
}:
' Unextended times. These cycle times will be incrc:iscd

Drying Options:

HEATED DRY. Avtiilable on till wash cycles cxccpt RINSE & HOLD. Add 29 minutes to wush cycle time.
ENERGY SAVER. Drying heater is turned off'. Dishes dry nuturally.
Good dishwashing starts with HOT water
To get dishes clean and dry you need hot water. To help you get water of the proper temperature,
your dishwasher has a WATER HEAT feature that automatically senses the temperature of the water
in the wash cycle and heats it, if necessary, to the proper temperature. This water heating feature may allow
you to turn down your household water heater and save energy if you're willing to let the dishwasher run a little
longer while it heats water to the proper temperature. For good washing and drying, the entering water must be at
least 120°F. To prevent dish damage, inlet water should not exceed 150°F.
Time
10
WATER SAVER—For dishes with light soils that
have not dried on, or that have extra preparation
before loading. It saves water and energy.
RINSE & HOLD—For rinsing partial loads which
PLATE WARMER—For warming clean dishes
During the drying period:
—The motor stops.
— Water vapor comes through the vent by the
door latch during drying and when water is
being pumped out.
5