Dial Cycles; Cycle Selection Chart - Hotpoint HDA900 Use And Care Manual

Dial Cycles

The cycle is for rinsing
RINSE & HOLD
partial loads which will be washed later.
Do not use detergent.
a. Make sure
HEATED DRY is
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
RINSE & HOLD.
d. Latch the door to start the cycle.

Cycle Selection Chart

Water Use
Gallons
Wash Cycles
POTS &
10.6
PANS
NORMAL WASH
7.9
LIGHT WASH
WATER SAVER 6.4
RINSE & HOLD 3.0
*Unextended times. These cycle times will be increased approximately 2 I minutes if HEATED WASH option is sclcctcd
Drying Options:
Available on all wash cycles except RINSE& HOLD. Add 3 I minules to wash cycle time.
HEATED DRY,
ENERGY SAVER. Drying heater is turned off. Dishes dry naturally.
off.
Time
Minutes
72
HOURS
.
6•*
OFF@
RINSE& HOLD
The
PLATE WARMER
clean dishes and serving plates for the serving
of hot foods. The cycle will take approximately
39 minutes if selected.
a. Load clean plates and dishes to be warmed.
b. Select
HEATED DRY
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator Dial to
PLATE WARMER.
e. Latch the door to start the cycle.
Cycle Sequence
cycle is for warming