Loading; Cycle Selection; Drying Options - Hotpoint HDA489M Use And Care Manual

Cycle selection hin~
It is important to follow the loading
instructions on pages 8 and 9.
NORMAL WASH—For most
loads of everyday dishes, glasses
and cookware with medium soils.
LIGHT WASH—For dishes
that have been before
pre-rinsed
loading. Also, for washing very
soiled dishes with soils
lightly
that have not dried on.
RINSE HOLD—For rinsing
partial loads which will be washed
later. Select DRYING HEAT–
OFF drying option. Do not
detergent.
What happens in each cycle
sounds:
–Soft food disposer shredding
action.
—Drain valve opening to pump
water out.
—Timer control as cycle
progresses.
—Detergent cup opening.
Water Use Cycle Time
Wash Gallons
Cycles
NORMAL WASH 12.1
LIGHT WASH
4.9
RINSE HOLD

Drying Options:

DRYING HEAT–ON: Available on all wash cycles except RINSE HOLD.
Add 29 minutes to wash cycle time.
DRYING HEAT–OFF: Drying heater is turned off. Dishes dry naturally.
use
. Water vapor comes through
the vent by the door latch during
drying and when water is being
pumped out.
Wash
minutes) Cycle Sequence
6
'
50
5