Loading; Cycle Selection; Drying Options; Plate Warmer - Hotpoint HDA969 Use And Care Manual

Built-in dishwasher
Table of Contents

Advertisement

For DRY~LATE WARMER
cycle:
a. Load clean plates and dishes to
be warmed.
b. Select DRYING HEAT ON.
c. Leave the door unlatched.
ON
.
OFF
.
d. Slowly turn Cycle Indicator
Dial clockwise to DRY/PLATE
WARMER position.
e. Latch the door to start the cycle.
What happens in each cycle
You' II hear occasional c1 icking
sounds:
—Soft food disposer shredding
action.
—Drain valve opening to pump
water out.
—Timer control as cycle
progresses.
—Detergent cup opening.
I 2,1
POTS & PANS
NORMAL WASH
12.1
LIGHT WASH
RINSE & HOLD
Water Heat Option is selected.

Drying Options:

DRYING HEAT ON—Available on all wash cycles except RINSE & HOLD. Add 29
wash cycle time.
DRYING HEAT OFF—(NO Heat Drying). Drying heater is turned off. Dishes dry naturally.
Cycle selection hints
It is important to follow the loading
instructions on pages 8 and 9.
POTS & PANS—For items such
as pots, pans, cookware, dishes and
glasses with heavy soil. Everyday
dishes may be included.
NORMAL WASH—For most
loads of everyday dishes, glasses
and cookware with medium soils.
LIGHT WASH—For dishes that
have been pre-rinsed before loading.
Also, for washing very lightlv
soiled dishes with soils that have
not dried on.
During the drying period:
—The motor stops.
— Water vapor comes through the
vent by the door latch during
drying and when water is being
pumped out.
10
RINSE & HOLD—For rinsing
partial loads which will be washed
later. Select DRYING HEAT OFF.
DRY/PLATE WARMER—For
warming clean dishes and serving
plates for the serving of hot food.
minutes to
5

Advertisement

Table of Contents
loading

Table of Contents