Loading; Cycle Selection; Drying Options; Plate Warmer - Hotpoint HDA950G Use And Care Manual

For PLA~ W~
Load clean plates and dishes to
be warmed.
b. Select DRYING HEAT–ON
drying option.
c.
turn Cycle Indicator Dial
d. Slowly
clockwise to PLATE WARMER
position.
e. Latch the door to start the cycle.
Water Use Cycle Time
wash
PANS 12.9
m&
11.0
9.5
LIGHT WMH
5.3
You'll hear occasional clicking
sounds:
—Soft food disposer shredding
action.
—Drain valve opening to pump
water out.
—Timer control as cycle
progresses.
—Detergent cup opening.
Cycle selection hinfi
It is important to follow the loading
instructions on pages 8 and 9.
pots, pans, cookware, dishes and
glasses with heavy soil. Everyday
dishes may be included.
NORMAL WASH—For most
loads of everyday dishes, glasses
and cookware with medium soils.
LIGHT WASH—For dishes
that have been pre-rinsed before
loading. Also, for washing ve~
soiled dishes with soils
lightly
that have not dried on.
Minimum
Wash
minutes)
4'* mBmmBBm
45*
45*
17
During the drying period:
—The motor stops.
—Water vapor is released through
the vent under the door handle.
It maybe visible.
partial loads which will be washed
later. Select DRYING HEAT–
OFF drying option. Do not use
PLATE WARMER—For warming
clean dishes and serving plates for
the serving of hot food.
5
*WATER TEMP BOOST-ON:
The timer will not advance until
water reaches proper temperature.
(See WATER TEMPBOOST
option onpage4.)
*DRYING HEAT—ON:
Add 21 minutes.
h
i
.
I
m
m
i