Promise Technology SmartStor NS2300N Product Manual page 138

SmartStor NS2300N Product Manual
Reported Event
System fan speed is lower
than 1800 RPM. Check
the system before
continuing.
AC Power failure. System
will shut down.
Disk Drives
Task X timeout on disk Y
at LBA [address]
Task X disk error on disk
Y at LBA [address] with
status Z
S.M.A.R.T threshold
exceeded on disk X
BSL update on disk X at
LBA [address]
BSL log disk X at LBA
[address] cleared
Delete Spare Disk
RAID Volumes
Create [RAID name,
RAID level and X number
of disk drives]
Delete RAID X
Migration or Rebuilding
on array X started.
Migration or Rebuilding
on array X at Y%.
Migration or Rebuilding
on array X paused at Y%.
Migration or Rebuilding
on array X resumed at
Y%.
Migration or Rebuilding
on array X completed.
Only reported when the Smart Fan is disabled. See
page 116.
Replace the fan. See "Contacting Technical Support"
on page 140.
Restore the AC power. Then restart the SmartStor.
See "Connecting the Power" on page 7.
A LBA error. Check the disk drives. See page 124.
Check the RAID Volume. See page 125. Replace the
disk drive or rebuild the RAID Volume as needed.
Check the disk drives. See page 124. Replace the
failed drive. See page 124.
Bad sector on a disk drive. Check the disk drives.
See page 124. Replace the disk drive if it continues
to receive BSL updates.
Check the disk drives. See page 124.
Delete a spare drive. Normal.
Create a RAID Volume. Normal.
Delete a RAID Volume. Normal.
RAID Volume Migration or Rebuild has started.
Normal.
Progress report on RAID Volume Migration or
Rebuild. Normal.
RAID Volume Migration or Rebuild was paused
temporarily by user action.
RAID Volume Migration or Rebuild was paused and
then resumed by user action.
RAID Volume Migration or Rebuild has finished.
Normal.
130
Corrective Action