Switching Between List Files - Casio fx-FD10 Pro User Manual

u To use list contents in ListAns Memory in a calculation
Example
• The operation K1(LIST)1(List)!K recalls ListAns Memory contents.
• This operation replaces current ListAns Memory contents with the result of the above
calculation.
k Performing Scientific Function Calculations Using a List
Lists can be used just as numeric values are in scientific function calculations. When the
calculation produces a list as a result, the list is stored in ListAns Memory.
Example

4. Switching Between List Files

You can store up to 26 lists (List 1 to List 26) in each file (File 1 to File 6). A simple operation
lets you switch between list files.
u To switch between list files
1. From the Main Menu, enter the STAT mode.
Press !m(SET UP) to display the STAT mode Setup screen.
2. Use c to highlight "List File".
3. Press 1(FILE) and then input the number of the list file you want to use.
Example
To multiply the list contents in ListAns Memory by 36
K1(LIST)1(List)!K*dgw
41
To use List 3
65
22
Use radians as the angle unit.
!h(sin)K1(LIST)1(List)dw
To select File 3
1(FILE)d
w
to perform sin (List 3)
4-12