Casio fx-FD10 Pro User Manual page 165

u Using the JUMP Command to Move the Cell Cursor
To move the cell cursor to here:
A particular cell
Line 1 of the current column
Column A of the current row
Last line of the current column
Column Z of the current row
u To select a range of cells
1. Move the cell cursor to the start point of the range of cells you want to select.
• You could select and entire row or column of cells as the start point, if you want. For
details about selecting cells, see "To select cells" on page 7-5.
2. Press !b(CLIP).
• This will change the cell cursor to a thick-line boundary instead of the normal highlighting.
3. Use the cursor keys to move the cell cursor to the end
point of the range of cells you want to select.
• The edit box will show the range of the selected cells.
• To cancel cell selection, press J. If you do, the cell
cursor will be located at the end point of the range you
selected.
k Data (Constants, Text, Formula) Input Basics
First let's have a look at a few basic procedures that apply regardless of the type of data you
are inputting.
u To overwrite data currently in a cell with new data
1. Move the cell cursor to the cell where you want to input data.
• If the cell you select already contains data, the following step will overwrite the existing
data with new input.
2. Use the calculator's keys to input data.
• As you perform key operations to input values or text
(such as b, a1(A-E)2(B), etc.), the applicable
figures will appear aligned left inside the edit box.
• To cancel an input operation part way through at any
point before advancing to step 3 below, press J. This
will return the cell contents to what they were in step 1
of this procedure.
3. To finalize and apply your input, press w.
Do this:
1. Press 2(EDIT)4(JUMP)1(GO).
2. On the dialog box that appears, enter the name
of the cell (A1 to Z999) to which you want to
jump.
3. Press w.
Press 2(EDIT)4(JUMP)2(TOP↑ ).
Press 2(EDIT)4(JUMP)3(TOP← ).
Press 2(EDIT)4(JUMP)4(BOT↓ ).
Press 2(EDIT)4(JUMP)5(BOT→ ).
7-6