Using The Hp C-Class Blade Suv Cable; Connecting Locally To A Server Blade With Video And Usb Devices; Accessing A Server Blade With Local Kvm - HP ProLiant BL280c G6 User Manual

The server blade supports SAS hard drives when the HP Smart Array P712m Controller is installed. For more
information, see "HP Smart Array P712m Controller option (on page 37)."

Using the HP c-Class Blade SUV Cable

The HP c-Class Blade SUV Cable enables the user to perform server blade administration, configuration, and
diagnostic procedures by connecting video and USB devices directly to the server blade. For SUV cable
connectors, see "HP c-Class Blade SUV Cable (on page 10)."
Connecting locally to a server blade with video and
USB devices
Use the SUV cable to connect a monitor and any of the following USB devices:
•
USB hub
•
USB keyboard
•
USB mouse
•
USB CD/DVD-ROM drive
•
USB diskette drive
Numerous configurations are possible. This section offers two possible configurations. For more information,
see "USB support and functionality (on page 63)."

Accessing a server blade with local KVM

For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
CAUTION:
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
Connect the SUV cable to the server blade.
1.
Before disconnecting the SUV cable from the connector, always squeeze the release
Cabling 48