Rtc Battery - Models Without Wwan - HP ProBook 440 G1 Maintenance And Service Manual

RTC battery – models without WWAN
NOTE: RTC battery location varies on model with and without WWAN modules.
WWAN models: you must remove the system board to replace the RTC battery.
Non-WWAN models: you must remove only the service cover to replace the RTC battery.
Description
RTC battery for use in models without WWAN
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5.
Remove the service door (see
Remove the RTC battery:
1. Position the computer upside-down.
2. Use a thin screwdriver or similar tool to pry the battery out of the socket (1).
3. Remove the battery from the socket (2).
Reverse this procedure to install the RTC battery.
Battery on page 37).
Service door on page 38).
Component replacement procedures
Spare part number
721532-001
53